What do you use lens hoods for




















So I only take lens hoods with me, if I really need them. I use my lens hood as it is my first-line defense as I'm pretty rough with my gear. Also when I photograph dogs at animal services, the dogs can get pretty rough with my camera if they are running at me thinking it's a toy so the hood will absorb the impact just in case. I keep the lens hoods on mainly for protection.

Two bodies with attached lens and their hoods are stored in my backpack always ready to go go go. Almost any lens made after has a minimum of four individual lens elements usually many more. Off-axis light bounces around inside the surfaces of these elements. A lens hood is essential to avoid flare and loss of contrast from this extraneous light--light the lens designers assume is being block by a hood or other means by the responsible photographer.

The premise of this article is "flare looks cool". What a waste of space. Not true for wide angle lenses e. Today's lens coatings are that good that flares are basically gone. Some do help reduce flaring and ghosting, but I don't think any completely eliminate it. If they did, the amount of light they'd allow in would cause other issues.

Note that even with these coatings, it is difficult to completely eliminate ghosting and flaring. I have a pretty small backpack and works fine for me. If I had to, I can have more space by reversing the lens hoods; or detaching them and placing the smaller ones inside the bigger ones. Detach the lens and position vertical, etc, etc. Home Topics Gear. Posted In:. Premium Photography Tutorials Check out the Fstoppers Store for in-depth tutorials from some of the best instructors in the business.

Log in or register to post comments. S M - March 29, Artistry aside, they are a great line of defense in case your tripod takes an accidental spill.

Can you elaborate on why people hate UV filters? Deleted Account Robert Oslin - March 29, Lots of people argue that they degrade image quality which is true, but it's hardly noticeable unless you have a pretty cheap filter.

Fritz Asuro C Fisher - March 29, [Edited] To be honest, UV filters are not good for protecting the front element for impact damage anyway as it will break easily whatever hits it and probably damage the front element more. I think it all started from camera stores trying to upsell. Arguably, they offer the best first line of protection.

T Van - March 29, [Edited] Depending on lighting, they do a great job of reducing lens flare, which you can add in post with more control and refraction which I don't think anyone would want.

T Van Iain Stanley - March 30, Flare manifests itself in two ways: as visible artifacts and as glare across the image. Deleted Account - March 29, I always use lens hoods except in specific cases when I am looking for that natural flare not often. Greg Wilson - March 29, Visibly improves contrast on a long telephoto. It will both fit the front and provide the optimum amount of shade. If you need to replace a lens hood, make sure you buy one with a similar profile.

The best advice is to pop the hood on the lens and never take it off. However, situations can get tricky in the real world. Lens hoods are awkward, bulky, and another thing you have to take with you everywhere.

Browse All iPhone Articles Browse All Mac Articles Do I need one? Browse All Android Articles Browse All Smart Home Articles Customize the Taskbar in Windows Browse All Microsoft Office Articles What Is svchost.

Browse All Privacy and Security Articles Browse All Linux Articles Browse All Buying Guides. Best iPhone 13 Pro Case. Best Bluetooth Headphones for Switch. Best Roku TV. Best Apple Watch. Best iPad Cases. Best Portable Monitors. Another tip here is to always keep your lens clean as this will increase contrast and avoid lens flare too.

There are times when you might not want to use a lens hood. This is when you actually want to create lens flare or when you are using the pop-up flash on your camera. On some cameras, the light from the pop-up flash will be blocked by the lens hood and create a shadow in the bottom of your picture. Creating lens flare on purpose can also give an awesome look to both portrait and landscape photography.

Taken without a lens hood whilst shooting into the sun. The circles you see is the light reflecting off the elements within the lens.

It breaks down into two main types really. A petal-type lens hood and a cylindrical one. Petal lens hoods have the corners cut away. These types of hoods are used on your standard zoom lenses and lenses that go to wider angles. Then you have cylinder lens hoods, and these are perfect cylinders with nothing cut away.

They are made for fixed focal range lenses prime lenses and telephoto lenses. Telephoto lenses, lenses used for sports and wildlife photography, can also have cylinder lens hoods. This is because these lenses do not go to wide angles, therefore the lens hood will not be seen. To learn more about lenses and focal lengths, click here. Is it a one size fits all scenario? You have to get the lens hood for your particular lens. To store compactly, simply reverse the hood on your particular lens; this will reduce the amount of space it takes up.

Lens hoods tend to come in two shapes; petal shaped and cylindrical shaped. Petal Lens Hoods Petal lens hoods are uniquely designed to be shorter and have curved notches that block out light, whilst increasing the frame size offered by wide angle lenses and full-frame camera sensors.

Cylindrical Lens Hoods Cylindrical lens hoods work by protecting your lens and blocking stray light. You can ask us in store or research about the appropriate lens hood shape for your lens. Browse our lens hoods today. If you need any more information on lens hoods or which one would be best for you, contact us on , or visit us in store.



0コメント

  • 1000 / 1000